M Transceivers
Jämför 97 artiklar inom M Transceivers från tillverkare som Alcatel Lucent, med löpande prisbevakning och aviseringar.
- Produkter
- 97 produkter
- Prisintervall
- 1 606,93 kr – 328 114,61 kr listprisintervall (SEK)
- Tillverkare
- 1 främsta tillverkare
M Transceivers – delar
Sparade sökningar
Inga produkter matchar dina filter.
Alla produkter
Filtrera i katalogen →100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the central office (OLT) transmits 1550nm and receives 1310nm optical signal
100Base-BX Industrial SFP transceiver with an LC type interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 20KM point-to-point. This transceiver is normally used in the client (ONU) transmits 1310nm and receives 1550nm optical signal
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over multimode fiber optic cable.
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 15KM.
100Base-FX Industrial SFP transceiver with an LC type interface. This transceiver is designed for use over single mode fiber optic cable up to 40KM.
10 Gigabit Industrial direct attached copper cable (1m, SFP+)
3 m. direct attached SFP+ copper cable, industrial grade
10 Gigabit Industrial direct attached copper cable (7m, SFP+)
10 Gigabit industrial optical transceiver (SFP+). Supports monomode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 40Km
10 Gigabit industrial optical transceiver (SFP+). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km.
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1490 nm and receives 1310 nm optical signal.
1000Base-BX SFP transceiver with an LC type of interface. This bi-directional transceiver is designed for use over single mode fiber optic on a single strand link up to 10 km. Transmits 1310 nm and receives 1490 nm optical signal.
Industrial grade Gigabit SFP transceiver. Supports single mode fiber, 120 km, 1550nm, LC Connector, Digital Diagnostic Monitoring (DDM), Extended Temperature -40/85C.
1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength (nominal) with an LC connector. Typical reach of 40 Km on 9/125 µm SMF.
1000Base-LH Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector. Typical reach of 70 Km on 9/125 µm SMF.
1000Base-LX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector. Typical reach of 10 Km on 9/125 µm SMF.
1000Base-SX Industrial Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal) with an LC connector. Typical reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.
1000Base-T Gigabit industrial ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP supports 10/100/1000 Mbit/s and full-duplex mode.
100 Gigabit QSFP28 direct attached active optical cable. 20 m.
100 Gigabit direct attached copper cable (1m, QSFP28)
100 Gigabit direct attached copper cable (3m, QSFP28)
100 Gigabit direct attached copper cable (5m, QSFP28)
100 Gigabit optical transceiver (QSFP28). Supports link lengths of 2Km over singlemode fiber cables. Single MPO
100 Gigabit optical transceiver (QSFP28). Supports link lengths of 2Km over singlemode fiber cables. Single MPO. CWDM4