What does 10X attenuation mean?

10X means the probe reduces the measured signal amplitude by a factor of 10 for display on the oscilloscope. This allows measurement of higher voltages without overloading the instrument's input.

Is the P6065A compatible with modern oscilloscopes?

No, the P6065A is designed for analog oscilloscopes with BNC inputs from the 1960s-1980s. Modern digital oscilloscopes typically require active probes or specific probe adapters.

What is the input impedance of this probe?

The P6065A has an input impedance of 10 MΩ (megohms) at the 10X setting, typical for passive probes of this generation.

Can this probe be used for high-speed measurements?

The P6065A's 100 MHz bandwidth is adequate for audio-frequency and some low-speed RF applications, but not suitable for high-speed digital or modern RF measurement.

What oscilloscopes work with the P6065A?

Compatible with classic Tektronix analog oscilloscopes including the 465, 545, and 7000 series, as well as other analog scopes with standard BNC connectors.

Is the probe passive or active?

The P6065A is a passive probe, meaning it contains no active electronics or batteries. Passive probes are inherently reliable and stable over long periods.

What condition would a used P6065A typically be in?

Used examples range from excellent vintage condition to well-worn. Check for damaged insulation, cracked plastic housings, and verify probe tips for wear. Functionality can typically be verified by resistance checks.

How does the P6065A compare to 1X probes?

The 10X attenuation reduces input loading but requires a 10X setting on the oscilloscope dial. 1X probes have higher loading but don't require compensation. The P6065A is better for high-impedance circuit measurements.

Tektronix Begär en offert

P6065A

Tektronix P6065A 10X Passive Oscilloscope Probe 100 MHz

Kategori Passive Probes

Listpris

279,54 kr

Enhet: pcs

Art.nr (normaliserat): P6065A

Begär en offert

WTB — köp · WTS — sälj

Kontrollen kunde inte slutföras. Tryck på rutan för att försöka igen.

Antal

Lägg till information (Valfritt)

Skick

Målpris

Valuta

Datablad

Specifikationer

length	Approximately 4 feet
connector	BNC
probe_type	Passive
attenuation	10X
voltage_rating	600V CAT I / CAT II
input_impedance	10 MΩ
input_capacitance	12 pF
frequency_response	DC to 100 MHz